Skip to main content

Version 6.12.0 2023-06-14

Upgrade notes​

Upon boot, if all PCI devices specified in config/vfio-pci.cfg do not properly bind, VM Autostart is prevented. You may still start individual VMs. This is to prevent Unraid host crash if hardware PCI IDs changed because of a kernel update or physical hardware change. To restore VM autostart, examine /var/log/vfio-pci-errors and remove offending PCI IDs from config/vfio-pci.cfg file and reboot.

If you revert back from 6.12 to 6.11.5 or earlier, you have to force update all your Docker containers and start them manually after downgrading. This is necessary because of the underlying change to cgroup v2 starting with 6.12.0-rc1.

Linux Multi-Gen LRU is a relatively new feature now included but not enabled by default. You can enable by adding this line to your 'config/go' file:

echo y > /sys/kernel/mm/lru_gen/enabled

If you revert back from 6.12 to 6.11.5 or earlier, you may need to remove that line.

If you created any zpools using 6.12.0-beta5, please Erase those pools and recreate.

Obsolete/Broken plugins​

There are a few plugins which are known to be incompatible with Unraid 6.12, and upon boot will not be installed. You will get a notification for each plugin that is affected and can review the list by going to Plugins/Plugin File Install Errors.

  • disklocation-master version 2022.06.18 (Disk Location by olehj, breaks the dashboard)
    • Update this plugin before upgrading the OS
  • plexstreams version 2022.08.31 (Plex Streams by dorgan, breaks the dashboard)
    • Update this plugin before upgrading the OS
  • corsairpsu version 2021.10.05 (Corsair PSU Statistics by Fma965, breaks the dashboard)
    • Update this plugin before upgrading the OS
  • gpustat version 2022.11.30a (GPU Statistics by b3rs3rk, breaks the dashboard)
    • Switch to GPU Statistics by SimonF
  • ipmi version 2021.01.08 (IPMI Tools by dmacias72, breaks the dashboard)
    • Switch to IPMI Tools by SimonF
  • nut version 2022.03.20 (NUT - Network UPS Tools by dmacias72, breaks the dashboard)
    • Switch to NUT - Network UPS Tools by SimonF
  • NerdPack version 2021.08.11 (Nerd Tools by dmacias72)
    • Switch to NerdTools by UnRAIDES
  • upnp-monitor version 2020.01.04c (UPnP Monitor by ljm42, not PHP 8 compatible)
  • ZFS-companion version 2021.08.24 (ZFS-Companion by campusantu, breaks the dashboard)

Some of the affected plugins have been taken over by different developers, we recommend that you go to the Apps page and search for replacements. Please ask plugin-specific questions in the support thread for that plugin.

Known issues​

Note: this is no longer an issue as of Unraid 6.12.6.

We are aware that some 11th gen Intel Rocket Lake systems are experiencing crashes related to the i915 iGPU. If your Rocket Lake system crashes under Unraid 6.12.0-6.12.5, open a web terminal and type this, then reboot:

echo "options i915 enable_dc=0" >> /boot/config/modprobe.d/i915.conf

Setting this option may result in higher power use but it may resolve this issue for these GPUs.

If you are getting call traces related to macvlan, as a first step we'd recommend navigating to Settings > Docker, switching to advanced view, and changing the Docker custom network type from macvlan to ipvlan. This is the default configuration that Unraid has shipped with since version 6.11.5 and should work for most systems.

However, some users have reported issues with port forwarding from certain routers (Fritzbox) and reduced functionality with advanced network management tools (Ubiquity) when in ipvlan mode.

In 6.12.0, the two-nic docker segmentation method is a viable workaround, but our recommendation is to upgrade to Unraid 6.12.4 which has a better solution.

Plex​

If Docker containers have issues starting after a while, and you are running Plex, go to your Plex Docker container settings, switch to advanced view, and add this to the Extra Params: --no-healthcheck

Rolling back​

See the comments under Upgrade Notes

ZFS pools​

New in this release is the ability to create a ZFS file system in a user-defined pool. You may also format any data device in the unRAID array with a single-device ZFS file system. For a good overview of ZFS, see this article.

We are splitting full ZFS implementation across two Unraid OS releases. Initial support in this release includes:

  • Support raid0, mirror, raidz1, raidz2 and raidz3 root profiles. Up to 4-way mirror in a mirror vdev. Multiple vdev groups.
  • Support removing single device: if device is still present in server, 'wipefs' is used to clear the partition table.
  • Support replacing single missing device with a new device of same or larger size.
  • Support scheduled trimming of ZFS pools.
  • Support pool rename.
  • Pool names must begin with a lowercase letter and only contain lowercase letters, digits, the underscore, and dash. Pool names must not end with a digit.
  • Non-root vdev cannot be configured in this release, however, they can be imported. Note: imported hybrid pools may not be expanded in this release.
  • Pools created on other systems may or may not import depending on how the pool was created. A future update will permit importing pools from any system.

A ZFS pool has three variables:

  • profile - the root data organization: raid0, mirror (up to 4-way), raidz1, raidz2, raidz3
  • width - the number of devices per root vdev
  • groups - the number of root vdevs in the pool

At time of ZFS pool creation, the webGUI will present all topology options based on the number of devices assigned to the pool.

Special treatment for root single-vdev mirrors:

  • A single-device ZFS pool can be converted to multiple-device mirror by adding up to 3 additional devices in one operation.
  • A 2-device mirror can be increased to 3-device by adding a single device; similarly, a 3-device mirror can be increased to 4-device mirror by adding a single device.

To add an additional root vdev, you must assign 'width' number of new devices to the pool at the same time. The new vdev will be created with the same 'profile' as the existing vdevs. Additional flexibility in adding/expanding vdevs will be provided in a future update.

Pools created with the steini84 plugin can be imported as follows: First create a new pool with the number of slots corresponding to the number of devices in the pool to be imported. Next assign all the devices to the new pool. Upon array Start the pool should be recognized, though certain zpool topologies may not be recognized (please report). Please note that only pools using partition #1 can be imported in this release, e.g. this lsblk output:

# lsblk
NAME        MAJ:MIN RM   SIZE RO TYPE MOUNTPOINTS
sdb           8:16   0   7.3T  0 disk
├─sdb1        8:17   0     2G  0 part
└─sdb2        8:18   0   7.3T  0 part

indicates that the second (sdb2) partition of the disk is being used for data, and cannot be imported.

Mixed topologies are not supported. For example, a pool with both a mirror root vdev and a raidz root vdev is not recognized.

Autotrim can be configured as on or off (except for single-device ZFS volumes in the unRAID array).

Compression can be configured as on or off, where on selects lz4. Future update will permit specifying other algorithms/levels.

When creating a new ZFS pool you may choose zfs - encrypted, which, like other encrypted volumes, applies device-level encryption via LUKS. ZFS native encryption is not supported at this time.

During system boot, the file /etc/modprobe.d/zfs.conf is auto-generated to limit the ZFS ARC to 1/8 of installed memory. This can be overridden if necessary by creating a custom 'config/modprobe.d/zfs.conf' file. Future update will include ability to configure the ARC via webGUI, including auto-adjust according to memory pressure, e.g., VM start/stop.

Top-level user shares in a ZFS pool are created as datasets instead of ordinary directories.

Share storage conceptual change​

New in this release is a conceptual change in the way storage is assigned to shares. The old concept of main storage being the unRAID array with an optional "Cache" is confusing to many new users, especially since cache has a specific meaning in ZFS.

Also outlined below, we introduced the concept of an exclusive share. This is simply a share where all the data exists in a single named pool. In this case, the FUSE-based User Share file system returns a symlink to the actual share directory in the pool. All operations within the share, including data transfer, therefore bypass FUSE, resulting in greater performance. This feature is primarily aimed at maximizing I/O for large fast ZFS pools accessed via a fast network

This is a front-end change only; existing shares will be viewed with this new structure automatically upon upgrading, and will automatically revert to the previous style if you revert to an earlier version.

Configuring the storage options for a share is specified using two inputs:

  • Primary storage
  • Secondary storage

Primary storage is where new files/folders are created. If Primary storage is below the Minimum Free Space setting then new files and folders will be created in Secondary storage, if configured.

Each input presents a drop-down which lists "array", "none", and each named pool as a selection according to some configuration rules:

For the Primary storage drop-down:

  • the "none" option is omitted, ie, Primary storage must be selected
  • any named pool can be selected
  • "Array" can be selected (meaning the unRAID array)

For the Secondary storage drop-down:

  • the "none" option is included, ie, Secondary storage is optional
  • if Primary storage is a pool name, then the only options are "none" and "Array". In the future other pools will be listed here as well.
  • if Primary storage is "Array", then only "none" appears as an option

When "Array" is selected for either Primary or Secondary storage, a set of additional settings slide in:

  • Allocation method
  • Included disk(s)
  • Excluded disk(s)
  • Split level

When a btrfs named pool is selected for either Primary or Secondary storage, an additional setting slides in:

  • Enable Copy-on-write

When a ZFS named pool is selected for either Primary or Secondary storage, there are no additional settings at this time but there could be some in the future. For example, since a share is created as a ZFS dataset, it could have a different compression setting than the parent pool if we need to implement this.

Mover action​

When there is Secondary storage configured for a share the "Mover action" setting becomes enabled, letting the user select the transfer direction of the mover:

  • Primary to Secondary (default)
  • Secondary to Primary

Exclusive shares​

We added a new setting: "Settings/Global Share Settings/Permit exclusive shares" [Yes/No] default: No. If set to Yes and if Primary storage for a share is a pool and Secondary storage is set to "none", then a symlink is created in /mnt/user/share pointing directly to the pool share directory. (An additional check is made to ensure the share also does not exist on any other volumes.)

There is a new status flag, 'Exclusive access' which is set to 'Yes' when a symlink is in place; and, 'No' otherwise. Exclusive shares are also indicated on the Shares page.

The advantage of setting up symlinks is that I/O bypasses FUSE-based user share file system (shfs) which can significantly increase performance.

There are some restrictions:

  • Both the share Min Free Space and pool Min Free Space settings are ignored when creating new files on an exclusive share.
  • If a share is NFS-exported it cannot be exclusive, i.e., the syslink is not created. This is because symlinks are resolved in the NFS client, not the server. We hope to lift this restriction in a future update.

Clean Up button​

Appearing on the Shares page, a button called CLEAN UP, when enabled indicates there are config/share/share.cfg files for shares that do not exist. Clicking this button will remove those files.

Other Improvements​

btrfs​

Autotrim can be configured as on or off when used in a pool.

Compression can be configured as on or off. on selects zstd. Future update to permit specifying other algorithms/levels.

xfs​

Autotrim can be configured as on or off when used as a single-slot pool.

Docker​

It is possible to configure the Docker data-root to be placed in a directory on a ZFS storage pool. In this case, Docker will use the 'zfs' storage driver. This driver creates a separate dataset for each image layer. Because of this, here is our recommendation for setting up Docker using directory:

First, create a docker user share configured as follows:

  • Share name: docker
  • Primary storage: name of your ZFS pool
  • Secondary storage: none

Next, on Docker settings page:

  • Enable docker: Yes
  • Docker data-root: directory
  • Docker directory: /mnt/user/docker

If you ever need to delete the docker persistent state, then bring up the Docker settings page and set Enable docker to No and click Apply. After docker has shut down click the Delete directory checkbox and then click Delete. This will result in deleting not only the various files and directories, but also all layers stored as datasets.

Before enabling Docker again, be sure to first re-create the docker share as described above.

Other Docker changes​

  • CreateDocker: changed label Docker Hub URL to Registry URL because of GHCR and other new container registries becoming more and more popular.
  • Honor user setting of stop time-out.
  • Accept images in OCI format.
  • Add option to disable readmore-js on container table.
  • Fix: Docker Containers console will not use bash if selected.
  • Fix issue detecting proper shutdown of docker.
  • rc.docker: give dockerd 30 sec instead of 15 to start up.

VM Manager​

If you enable copy/paste for virtual consoles you need to install additional software on the client in addition to the QEMU agent if that has been installed. Here is the location for spice-vdagent for both Windows and Linux. Note copy/paste function will not work with web spice viewer you need to use virt-viewer.

Other VM changes​

  • Add Serial option to vdisk.
  • Spice Bug fix for users with non standard GUI ports defined.
  • OVMF for QEMU: version stable202302
  • Fix for bus text.
  • Enable copy paste option for virtual consoles.
  • Update Memory Backup processing for Virtiofs.
  • Fix lockup when no VMs are present.
  • Add support for rtl8139 network model.
  • fix translation omission.
  • added lock/unlock for sortable items.
  • Fix for Spice Mouse if Copy paste enabled.
  • Let page load even when PCI devices appear missing or are misassigned.
  • Make remote viewer and web console options selectable.
  • Option to download .vv file and start remote viewer is browser set to open file .vv when downloaded.
  • Add remote viewer console support.
  • Remove-lock-posix='on'-flock='on'/-
  • Fix VM marked as Autostart not starting following manual array Start.
  • Fix for Max memory > 1TB.
  • Fix issues with VM page loads if users have removed vcpu pinning.
  • ovmf-stable: version 202305 (build 3).
  • fixed notification subject.

Dashboard​

The webGUI Dashboard has been redesigned and it is now possible to move elements (tiles) up and down and between columns. This allows the user to organize the tiles in any way they desire. There is a small lock icon on the menu bar which must be clicked to enable this function:

  • Green is normal state (page is locked)
  • Red is attention state (page is unlocked)

Note: The lock icon also appears on the Docker and VM pages and must be clicked to rearrange the startup order.

Network improvements​

We added a new section: Settings/Network Settings/Interface Extra

This new section allows the user to define which interfaces are used by the Unraid services. By default all regular interfaces with an IP address are included in the list of listening interfaces.

The tunnels of the built-in WireGuard function of Unraid are automatically added or removed from the list when the Wireguard tunnels are activated or deactivated. The user may exclude these tunnels from the list of listening interfaces.

To use the Tailscale or Zerotier interface, it is required to add the interface name or IP address of the communication to the list of included listening interfaces. Important: It is imperative that Tailscale or Zerotier container is running before the interface is added to the list. For more information, refer to this Community forum post.

Other Network changes​

  • Support custom interfaces (e.g. Tailscale VPN tunnel or zerotier L2 tunnel)
  • create_network_ini - restart smb when network changes are done
  • rc.inet1 - add iptables processing to bridge interfaces to make them operate similarly as macvlan interfaces
  • rc.avahidaemon - let service listen on regular interfaces only which have an IP address, this includes the primary interface + set ipv4 / ipv6 support
  • rc.docker - suppress ipv6 link-local address for docker0 and shim interfaces when set as ipv4 only
  • rc.samba - let smb, nmb service listen on regular interfaces only which have an IP address, this includes the primary interface + set ipv4 / ipv6 support (also for wsdd2)
  • rc.ssh - listen on regular interfaces only which have an IP address, this includes the primary interface + set ipv4 / ipv6 support
  • Fix issue where /etc/resolve.conf can get deleted when switching DNS Server between auto/static.
  • Fix bug in handling description field.
  • fix nginx recognizing IP address from slow dhcp servers

Other Improvements/Bug fixes​

  • Increased max number of devices per pool from 30 to 60. In a future release we will eliminate the upper maximum entirely.
  • webTerminal: For better readability, changed background color on directory listings where 'w+o' is set. Also changed renderer from webgl to canvas to mitigate issue with latest Chrome versions.
  • Fixed ntp drift file save/restore from persistent USB flash 'config' directory.
  • Removed extraneous /root/.config/remmina file
  • Share Edit: warn when invalid ZFS name is used
  • Share Edit: allow 1 letter names
  • Add Pushbits Agent for Matrix/Synapse integration.
  • cgroup2 now the default
  • loopback images no longer mounted using directio
  • newperms script restricted to operate on /mnt/ only.
  • upgradepkg patched to prevent replacing existing package with older version.
  • current PCI bus/device information saved in file '/boot/previous/hardware' upon Unraid OS upgrade.
  • NFS: enable UPD transport
  • emhttp: fix cache pool (null) syslog strings
  • emhttp: fix cache pool display wrong device size for selected replacement device
  • mover: fix improper handling of symlinks
  • mover: fix mover logging syslog entries format different from previous releases
  • plugin: Display Run command retval in error message
  • shfs: igonore top-level hidden directoris (names beginning with '.')
  • terminal: OpenTerminal: change termination signal (hard stop)
  • upgrade Unraid OS: check for earlier upgrade without reboot
  • webgui: support PHP8, increase PHP max memory from 128M to 256M
  • webgui: ManagementAccess: Disable Provision/Renew/Upgrade buttons when no IP on eth0
  • webgui: ManagementAccess: Support wireguard local IP addresses in combination with myservers.unraid.net SSL cert
  • webgui: Move "view" icon on Main and Shares page to the left
  • webgui: Keep dismissed banners hidden for a month
  • webgui: Dashboard: fix regression error in "select case"
  • webgui: Dashboard: make items moveable between columns
  • webgui: Dashboard: API for adding custom tiles
  • webgui: Dashboard: rearrange processor information
  • webgui: Dashboard: rearrange UPS info
  • webgui: Dashboard: rearrange memory info
  • webgui: Dashboard: VPN header rearrangement
  • webgui: Dashboard: header rearrangements
  • webgui: Add jqueryUI touch punch for mobile devices
  • webgui: Changed ID to CLASS for elements occurring more than once
  • webgui: Make header in white and black themes scrollable
    • When more items are present than screen space, the user can now scroll through them (previously these items were invisible)
  • webgui: Dashboard and Docker: introduce lock button for sortable items
    • By default sortable items are locked, which allows mobile devices to scroll the page. Upon request items can be made sortable
  • webgui: Users: add icon to title bar
  • webgui: Tools: new function -> PHP Settings
    • View PHP info
    • Configure error reporting
    • Open LOG to see errors in real-time
  • webgui: System info: fix reading inactive ports
  • webgui: Plugin: Include the actual command being executed
  • webgui: System info: cache enhancement
  • webgui: System info: memory enhancement
  • webgui: DeviceInfo: disable buttons when erase operation is running
  • webgui: Docker: filetree corrections
  • webgui: Dashboard: fixed show heat alarm per pool
  • webgui: Notifications: revised operation
    • Autoclose new notifications after 3 seconds
    • Fix notifications reappearing after closure
  • webgui: DeviceList: add FS type in offline state
  • webgui: Add notification agent for Bark
  • webgui: Main: hide browse icon when disk is not mounted
  • webgui: Diagnostics: add additional btrfs and zfs info
  • webgui: Dashboard: add ZFS memory usage
  • webgui: Revised New Permissions
    • Select either disks or shares (not both)
  • webgui: Add testparm to diagnostics
  • webgui: Support new UD reserved mount point of /mnt/addons
  • webgui: fix issue displaying Attributes when temperature display set to Fahrenheit
  • webgui: Dashboard changes:
    • lock the Dashboard completely: Editing/moving only becomes possible when unlocking the page
    • An empty column is refilled when the respective tiles are made visible again, no need to reset everything
    • added a visual "move indicator" on the Docker and VM page, to make clearer that rows can be moved now.
    • change cursor shape when moving is enabled
    • use tile title as index
  • webgui: fix: Local Firefox account pop-up postmessages not working
  • webgui: SMART test cannot be run on a UD disk because there is no spin down delay selection
  • webgui: status footer stuck on "Starting services" when applying share config setting chagnes.
  • webgui: Fix table layout for orphan images
  • webgui: Plugin: Do not show update button if incompatible
  • webgui: Plugin: Make wget percentage detection more robust
  • webgui: OpenTerminal: limit clients
  • webgui: Context menu: automatic triangle placement
  • webgui: Dashboard: fix pool warnings
  • webgui: Allow SMART long test for UD
  • webgui: Read processor type from /proc/cpuinfo
  • webgui: CSS: solve scrollbar issue in firefox
  • webgui: Add share: fix hidden share name check
  • webgui: Display settings: add missing defaults
  • webgui: Array Operation: prevent double clicking of Start button
  • webgui: DeviceInfo: show shareFloor with units
  • webgui: DeviceInfo: added automatic floor calculation
  • webgui: Added autosize message
  • webgui: Shares: added info icon
  • webgui: Updated DeviceInfo and Shares page
  • webgui: Fix network display aberration.
  • webgui: Auto fill-in minimum free space for new shares
  • webgui: feat(upc): update to v3 for connect
  • webgui: Share/Pool size calculation: show and allow percentage values
  • wireguard: add SSL support for WG tunnel IP addresses (myunraid.net wildcard certs only)
  • wireguard: fix nginx issue when partial WireGuard config

Release bz file differences​

Unraid OS is comprised of a set of 5 so-called bz files in the root of the USB Flash boot device:

  • bzimage - the Linux kernel
  • bzroot - the root file system, sans console desktop
  • bzroot-gui - additional files needed for console desktop
  • bzmodules - modules (drivers) associated with the Linux kernel
  • bzfirmware - device firmware required by certain modules

Starting with 6.12 release, the content of these files has been rearranged:

  • bzimage - the Linux kernel (same as before)
  • bzroot - the root file system excluding the /usr directory tree
  • bzroot-gui - a single file which auto-starts the console desktop (for compatibility)
  • bzmodules - modules (drivers) associated with the Linux kernel and device firmware required by certain modules
  • bzfirmware - the /usr directory and all files contained therein, including console desktop

These changes speed up the boot process and free up nearly 1G of RAM. It also permits us to add more "stuff" to Unraid OS in the future without requiring more RAM. Finally, when booted in non-GUI mode, the desktop can be started by logging in at the console and typig the 'slim' command.

Manual update​

Manual update refers to updating Unraid OS on your USB flash boot device without using the Tools/Update OS function. Typically one would either:

  • open a Terminal window, wget the release zip file, unzip the release, and then 'cp' the bz files to root of the boot device.

or

  • export the 'flash' share on your network and drag the bz files from a PC directly to the flash.

Either method, starting with 6.12 can fail because the bzfirmware file will be overwritten while it is still mounted - not good.

To get around this, you must first create a temp directory on the flash device and then 'mv' (or drag) all the existing bz files into this temp directory. Now you can copy the new bz files to the root of the flash device and reboot.

Linux kernel​

  • version 6.1.33
  • md/unraid: version 2.9.27
  • CONFIG_FS_DAX: File system based Direct Access (DAX) support
  • CONFIG_VIRTIO_FS: Virtio Filesystem
  • CONFIG_ZONE_DEVICE: Device memory (pmem, HMM, etc...) hotplug support
  • CONFIG_USBIP_HOST: Host driver
  • CONFIG_INTEL_MEI: Intel Management Engine Interface
  • CONFIG_INTEL_MEI_ME: ME Enabled Intel Chipsets
  • CONFIG_INTEL_MEI_GSC: Intel MEI GSC embedded device
  • CONFIG_INTEL_MEI_PXP: Intel PXP services of ME Interface
  • CONFIG_INTEL_MEI_HDCP: Intel HDCP2.2 services of ME Interface
  • CONFIG_INTEL_PMC_CORE: Intel PMC Core driver
  • CONFIG_DRM_I915_PXP: Enable Intel PXP support
  • CONFIG_SCSI_FC_ATTRS: FiberChannel Transport Attributes
  • CONFIG_FUSION_SPI: Fusion MPT ScsiHost drivers for SPI
  • CONFIG_FUSION_FC: Fusion MPT ScsiHost drivers for FC
  • CONFIG_FUSION_CTL: Fusion MPT misc device (ioctl) driver
  • CONFIG_FUSION_LOGGING: Fusion MPT logging facility
  • CONFIG_X86_AMD_PSTATE: AMD Processor P-State driver
  • CONFIG_LRU_GEN: Multi-Gen LRU
  • CONFIG_SERIAL_8250_NR_UARTS=32: Maximum number of 8250/16550 serial ports
  • CONFIG_SERIAL_8250_RUNTIME_UARTS=4: Number of 8250/16550 serial ports to register at runtime
  • CONFIG_FANOTIFY: Filesystem wide access notification

Base Distro updates​

  • aaa_glibc-solibs: version 2.37
  • adwaita-icon-theme: version 43
  • at-spi2-core: version 2.46.0
  • bash: version 5.2.015
  • bash_completion: version 2.11
  • bind: version 9.18.12
  • btrfs-progs: version 6.2.1
  • ca-certificates: version 20221205
  • cryptsetup: version 2.6.1
  • curl: version 7.88.1
  • dbus: version 1.14.6
  • diffutils: version 3.9
  • dnsmasq: version 2.89
  • docker: version 23.0.6
  • e2fsprogs: version 1.47.0
  • encodings: version 1.0.7
  • file: version 5.44
  • firefox: version 111.0 (AppImage)
  • freetype: version 2.13.0
  • fuse3: version 3.12.0
  • gawk: version 5.2.1
  • git: version 2.39.2
  • glib2: version 2.74.6
  • glibc: version 2.37
  • glibc-zoneinfo: version 2022g
  • gnutls: version 3.7.9
  • gptfdisk: version 1.0.9
  • gtk+3: version 3.24.37
  • harfbuzz: version 7.1.0
  • htop: version 3.2.2
  • iproute2: version 6.2.0
  • iptables: version 1.8.9
  • iputils: version 20221126
  • kernel-firmware: 20230531_fc90c59
  • less: version 612
  • libICE: version 1.1.1
  • libSM: version 1.2.4
  • libX11: version 1.8.4
  • libXau: version 1.0.11
  • libXcomposite: version 0.4.6
  • libXdamage: version 1.1.6
  • libXdmcp: version 1.1.4
  • libXpm: version 3.5.15
  • libXrandr: version 1.5.3
  • libXres: version 1.2.2
  • libXxf86dga: version 1.1.6
  • libarchive: version 3.6.2
  • libdrm: version 2.4.115
  • libfontenc: version 1.1.7
  • libglvnd: version 1.6.0
  • libjpeg-turbo: version 2.1.5.1
  • libpcap: version 1.10.3
  • libpng: version 1.6.39
  • libpsl: version 0.21.2
  • liburcu: version 0.14.0
  • libwebp: version 1.3.0
  • libxkbcommon: version 1.5.0
  • libxkbfile: version 1.1.2
  • libxshmfence: version 1.3.2
  • lmdb: version 0.9.30
  • logrotate: version 3.21.0
  • lsof: version 4.98.0
  • lz4: version 1.9.4
  • lzlib: version 1.13
  • mc: version 4.8.29
  • mcelog: version 191
  • mpfr: version 4.2.0
  • nano: version 7.2
  • ncurses: version 6.4
  • nginx: version 1.23.3
  • nghttp2: version 1.52.0
  • openssh: version 9.2p1
  • openssl: version 1.1.1t
  • openssl-solibs: version 1.1.1t
  • openzfs: version 2.1.12
  • pango: version 1.50.14
  • pciutils: version 3.9.0
  • pcre2: version 10.42
  • php: version 8.2.4
  • php-libvirt: version 0.5.7
  • php-markdown: version 2.0.0
  • samba: version 4.17.7
  • sqlite: version 3.41.0
  • sudo: version 1.9.13p2
  • sysstat: version 12.7.2
  • tdb: version 1.4.8
  • tevent: version 0.14.1
  • traceroute: version 2.1.2
  • transset: version 1.0.3
  • tree: version 2.1.0
  • usbutils: version 015
  • xcb-util: version 0.4.1
  • xdriinfo: version 1.0.7
  • xf86-video-vesa: version 2.6.0
  • xfsprogs: version 6.1.1
  • xhost: version 1.0.9
  • xinit: version 1.4.2
  • xkbcomp: version 1.4.6
  • xkeyboard-config: version 2.38
  • xorg-server: version 21.1.7
  • xprop: version 1.2.6
  • xrandr: version 1.5.2
  • xset: version 1.2.5
  • xterm: version 379
  • xz: version 5.4.1
  • zstd: version 1.5.4